Switch Settings - Epson FX-80 User Manual

AppendixK
Switch Settings
The FX-80 has two sets of internal switches which are used by the
printer to determine the default mode on power-up. The switches are
under the upper right vent. As outlined in Chapter 1, the vent screw
must be removed with a phillips-head screwdriver in order to take the
cover off.
Since switch settings are only checked by the printer on power-up,
all switch setting should be done with the power off. The printer will
not recognize changes made in switch settings when the power is on
until the printer is cycled off and then on again.
The factory sets and numbers the switches in the following way:
Table K·1. The DIP Switches.
Switch
1
Switch 2
295