The Ribbon - Epson FX-80 User Manual

The ribbon
Remove the ribbon cartridge from its packing materials. Holding
the cartridge by the plastidin on the top, lift the paper bail and insert
the cartridge. The ribbon should rest directly between the silver rib-
bon guide and the black print head (Figure 1-3). Note that the paper
bail has three positions: resting on the paper, raised straight up, and
raised forward (partially up and pulled toward the front of the
printer).
The two pairs of tabs at the ends of the ribbon cartridge snap neatly
into slots in the printer's frame. The cartridge should fit snugly into
place. To remove any slack in the ribbon, tum the ribbon knob in the
direction of the arrow.
Note: When you replace a ribbon, remember that the print head may
be hot from usage; allow it time to cool.
5