Epson FX-80 User Manual page 291

Dec Hex Symbol Function
*ESC 73 49 I Enables printing of the characters that are
stored in memory locations 0 - 31 and that
are not used for control codes. Symbols
stored in control-code locations must be
printed with (ESC)" R". Format:
ESC 74 4A J
ESC 75 48 K
ESC 76 4C L
ESC 77 4D M
ESC 78 4E N
ESC 79 4F
0
260
(ESC)" I "CHR$(n)
where n = 1 =) prints characters,
n = 0 =) prints control codes.
Forces an immediate line feed of n/216
inches without changing the current line
spacing. Prints the contents of the buffer
without a carriage return. Format:
(ESC)"J"CHR$(n)
where 0 ( = n ( = 255.
Normal Graphics Mode. Prints dot graphics,
480 dots per 8-inch line. Format:
(ESC) "K"CHR$(n1)CHR$(n2);
followed by n data numbers, where
n = n1
+
256*n2
0(= n1 (= 255
0(= n2 (= 255
For 480 dots, n1 = 224, n2 = 1.
Turns Low-Speed Double-Density Graphics
ON. Prints dot graphics, 960 dots per 8-inch
line. Format:
(ESC)"
~"CHR$(n1)CHR$(n2);
followed by n data numbers, where
n = n1
+
256*n2
0(= n1 (= 255
o
(= n2 ( = 255,
For 960 dots,
n1 = 192, n2 = 3.
Turns Elite Mode (12 cpi) ON. Cannot mix with
Pica, Proportional, Emphasized, or
Compressed Modes.
Sets skip-over-perforation to n lines. Format:
(ESC)"N"CHR$(n)
where 1 (= n (= 127.
Turns skip-over-perforation OFF.