The paper guide
Next, insert the plastic paper guide into the appropriate notches as
shown in Figure 1-4.
Figure 1·4. Inserting the paper guide.
Paper Feeders
Now it's time to learn how to feed the paper on the FX-80-and for
that, one of the following three sections will help.
The pin feeders
The pin-feed mechanism on the FX-80 is a built-in tractor unit. The
pin feeder accepts the most common type of fanfold paper, 9% by 11-
inch paper with removable tractor holes. Proper adjustment of the pin
feeders is important for smooth paper flow, and the release latches
(Figure 1-5) allow you to make slight adjustments in pin feeding. Note
that for standard adjustments the arrows on the levers can be lined up
with the notches in the silver cover. Set both arrows to 9.5 position.
7