First Things First; The Covers; Uncovering The - Epson FX-80 User Manual

while you have valuable information stored in memory. A quiet spot
is always nice, one that's away from other appliances. And your
printer needs enough room for the paper to flow freely.
Note: The printer should be turned OFF during all set-up operations.
First Things First
Once you've found a good home for your FX-80, you'll want to get
acquainted with it. The first parts that you need to recognize are the
pair of covers, the ribbon assembly, and the paper guide.
The
covers
The two covers on the FX-80 printer protect it from dust or foreign
objects that might damage the printer mechanism. You'll need to re-
move these lids to gain access to the inside, but they should be re-
placed when you're through (Figure 1-2). The rear cover comes off
with a slight tug upward; it snaps back into place. Move the front lid
to its full vertical position, then remove it by lifting straight up (you
may need to remove packing tape).
Figure 1·2. Uncovering the FX·80.
4