Epson FX-80 User Manual page 298

(ESC) "8" Turns the paper-out sensor OFF.
(ESC) "9" Turns the paper-out sensor ON.
(ESC) "C"CHR$(n) Sets the form length in lines: n
=
0 - 127.
(ESC) "C"CHR$(O)CHR$(n)
Sets the form length in inches: n
=
0 - 22.
(ESC) "N"CHR$(n) Produces a variable skip-over-perforation. n
=
o -
form length or 127.
(ESC) "0"
Turns skip-over-perforation OFF.
Formatting Commands
TAB(n) BASIC tab to column n. Varies with the system.
(ESC) "D"CHR$(n1) ... CHR$(nk)CHR$(O)
Sets the horizontal tab stops at n1, n2, ... , nk,
where k
(=
32, 0 ( nk ( margin length.
CHR$(9) Activates a horizontal tab.
(ESC) "B"CHR$(n1) ... CHR$(nk)CHR$(O)
Sets the vertical tab stops at n1 - nk, where k (
=
16, 0 ( nk ( form length.
(ESC) "b"CHR$(n)CHR$(n1)CHR$(n2) ... CHR$(nk)CHR$(O)
Stores vertical tab stops in channel n, where 0
(=
n
(=
7. Channel 0 is the same as (ESC)
"B"
.*
(ESC)" /"CHR$(n) Selects channel n.
CHR$(ll) Activates a vertical tab.
(ESC) "Q"CHR$(n) Sets the right margin at n, where n ranges
from 2 - 80 in Pica,
3 - 96 in Elite, and
4 - 137 in Compressed.
(ESC)
"1
"CHR$(n) Sets the left margin at n, where n ranges
from 0 - 78 in Pica,
o -
93 in Elite, and
o -
133 in Compressed. *
(ESC) "U1"
(ESC) "UO"
(ESC)" ("
Turns Continuous Unidirectional Mode ON.
Turns Continuous Unidirectional Mode OFF.
Turns One-Line Unidirectional Mode ON.
*If your computer cannot generate lower-case letters, use the equiva-
lent decimal values.
267