More Densities; The Seven Modes For Densities - Epson FX-80 User Manual

More densities
Yes, there are more densities. The FX-80 provides a single ESCape
sequence with which you can enter any of seven unique graphics
modes with ease-including the modes just covered. The format of
this command is:
LPRINT CHR$(27) "*"CHR$(m) CHR$(nJ CHR(nJ;
where m indicates the number (0 to 6) of the desired Graphics Mode.
There are six special densities available (Double-Density is part of two
modes, one for each print speed). The settings n
1
and n
2
are the usual
graphics width settings.
You can print all the modes by making these changes to your listing:
DELETE 40
10 FOR M=0 TO 6
20 A$=CHR$(27)+"*"+CHR$(M)+CHR$(120)+CHR$(0)
50 LPRINT "MODE # ";X;TAB(12);
70 LPRINT: NEXT M
i"1c)DE~
4i=
{"~
'IJ
f\1{Jr)f:~
:1:/:
:I
j'lODF *~
.-',
'::M
,'lODE :It-
~~
I'''IDDE
:I:f. 4·
r"IODE off.
::5
t10DE :1*
t·,
~~
~
Figure 13·4. The seven modes for densities.
Figure 13-4 displays all seven of the FX-80 modes that affect density.
Table 13-1 describes them.
147