Epson FX-80 User Manual page 350

Paper
fan-fold, 3, 7-11
labels, 10
roll, 3, 12-13
single-sheet, 3, 12-13, 14, 98
p
Paper-out sensor, 16, 17, 98-99, 258, 267, 296, 297
ESCape "9" turns it on; ESCape "8" turns it off.
Parallel interface. See Interfaces.
Pattern design. See Graphics
Pica Mode, 38-39
Pin
and DIP switch settings, 16, 296, 297
with other modes, 40-42, 269-272
assignments, 307
expressed as powers of two, 133, 137
feeder, 7-10
firing, 36-37, 128, 131, 132-134, 137, 141, 143, 144, 152,160, 173-174
patterns, 151, 159, 187-188
Pitch, 38-44, 303.
See also specific pitch.
POKEing codes, 282-283
Power, 304
Power switch, 3-4, 17, 19, 33
Print command, 21, 24
Printer, 256, 266.
CHR$(17) enables the printer; CHR$(19) disables the printer.
Accessing the, 21, 24
buffer, 29, 30
cable, 3, 17
deactivating with DIP switch, 16, 297
device controls, 263
dimensions of, 304
driver for problem codes, 283-284
interface kit, 3
maintenance, 301-302
set-up operations, 4-13
specifications, 303-305
Print commands, 21-24, 52-53
Print head, 35-36
changing, 302
and dot graphics, 128, 131
and dot matrix printing, 35
and paper loading, 8
and ribbon replacement,S
specifications, 304
. Unidirectional Mode, 117
Print pitch, 38-45.
See also specific pitches by name.
Print speed, 275, 303
Print width. See pitch.
Problem codes, 25-26, 71, 72, 83, 93, 108, 120, 130-131, 134, 138, 141, 143, 157,
173, 175, 188, 197, 201, 211, 226, 279-285, 287-289
Proportional Mode, 50-51, 52, 249-253, 263, 265.
320
ESCape "pI" turns it on; ESCape "pO" turns it off.
and attribute byte, 200
mixed with other modes, 52, 53, 291