The Optional Tractor Feeder; The Paper Path - Epson FX-80 User Manual

Figure 1·7. The paper path.
The technicians assure us that turning the manual-feed knob with
the printer
on
does not damage the gears, but it's easier to tum with
the printer off.
Don't get discouraged-it takes a little practice to get the paper
loaded right. The pin feeders must be set to just the right width or the
paper will jam. Feed the paper through, then, holding the paper
firmly, tum the roller knob until the paper holes line up with the pins.
If desperation sets in, try folding the first sheet over the second and
feeding them through together (thicker paper feeds a little better).
With a little practice, you will feed the paper through smoothly every
time.
The optional tractor feeder
If you plan to use either 81fz-inch paper with permanent pin-feed
holes or small labels with holes, you'll need to purchase a tractor-feed
unit to accommodate the narrower paper.
To install such a unit, imitate the movement suggested in Figure 1-8.
Insert hook A into stud
A
and rotate the unit toward the front of the
printer (pressing down firmly) until it locks into place. Make sure that
the gears are on the right side of the printer (the side with the buttons).
You don't need to work any levers to insert the unit, but you may need
to adjust the pin feeders if they are in the way of the tractor unit.
10