Epson FX-80 User Manual page 290

Dec Hex Symbol Function
ESC 66 42 B
Sets up to 16 vertical tabs in the current line
spacing. Tab settings are not affected by
subsequent changes in line spacing. Format:
(ESC) "B"CHR$(n1)CHR$(n2) ... CHR$(nk)CHR$(O)
where 1
(=
nk (
=
254. Terminate this tab
sequence with CHR$(O) or a number less
than that of the last tab (nk).
ESC 67 43 C
Sets the form length to n lines in the current
line spacing. The default is 66 lines. Also
resets Top Of Form. Format:
(ESC)"C"CHR$(n)
where 1
(=
n
(=
127.
ESC 67 43 C
Sets the form length to n inches, regardless
of the current line spacing. The default is 11
inches. Also resets Top Of Form. Format:
(ESC) "C"CHR$(O)CHR$(n)
where 1 (
=
n (
=
22.
ESC 68 44 D Resets the current tabs and sets up to 32
horizontal tabs in the current pitch. Tabs may
range up to the maximum width for the
character and printer size. For example, the
maximum tab for Pica characters on an 8-
inch line is 79. Tab settings are not affected
by subsequent changes in pitch. Format:
(ESC)" D"CHR$(n1 )CHR$(n2) ...
CHR$(nk)CHR$(O)
Terminate a tab sequence with CHR$(O) or a
number less than that of the last tab (nk).
ESC 69 45 E Turns Emphasized Mode ON. Cannot mix with
Elite, Proportional, or Compressed Modes.
ESC 70 46 F Turns Emphasized Mode OFF.
ESC 71 47 G
Turns Double-Strike Mode ON. Cannot mix
with Proportional Mode.
ESC 72 48 H
Turns Double-Strike Mode OFF.
259