Summary - Epson FX-80 User Manual

You'll want to use this code with caution, but it's nice to have when
needed. To restore the Sensor to full power, either use LPRINT
CHR$(27)" 9" or tum the printer off.
Summary
The printer automatically considers each page to be 11 inches or 66
normal lines long. You can change the length of each form (in inches or
lines) with an ESCape code. The Skip-aver-Perforation feature and
the Paper-Out alarm can be turned on or off, either by the internal
switches or by ASCII codes.
Note: Better reset any switches before going on to Chapter 9.
CHR$(12)
(ESC) "C" CHR$(n)
(ESC) "C"CHR$(O)CHR$(n)
(ESC) "N"CHR$(n)
(ESC)"O"
(ESC) "8"
(ESC) "9"
Produces a form feed
Sets form length in lines
Sets form length in inches
Skip-aver-Perforation ON,
set to n lines
Automatic SOP OFF
Paper-Out Sensor OFF
Paper-Out Sensor ON
99