Epson FX-80 User Manual page 289

Dec Hex Symbol Function
ESC 50 32 2 Returns line spacing to the default of 1/6 inch
(12 dots).
ESC 51
33 3
Sets line spacing to n/216 inch (1/216th inch
is about 1/3rd of a dot). Stays on until
changed. Format:
(ESC)"3"CHR$(n)
where 0
(=
n (
=
255.
ESC 52 34 4 Turns the italic character set ON.
ESC 53 35 5 Turns the italic character set OFF.
ESC 54 36 6 Enables the printing of the symbols which are
stored in locations 128 - 159.
ESC 55 37 7 Causes codes 128 - 159 to print as control
codes.
ESC 56 38 8 Disables the "paper out" sensor.
ESC 57
39
9 Enables the "paper out" sensor.
ESC 58 3A Copies character set from ROM to RAM.
Format:
(ESC) ";"CHR$(n1)CHR$(n2)CHR$(n3);
where n1, n2, and n3 are all
o.
(They are
included for future expansion.) The RAM
character set must be activated with (ESC)
" % ", and switch 1-4 must be off.
ESC 60 3C (
Turns Unidirectional Mode ON for 1 (only) line;
prints from left to right.
ESC 61 3D = Sets the 8th bit to 0 (limits the range to 0 -
127).
ESC 62 3E
) Sets the 8th bit to 1 (limits the range to 128 -
255).
ESC 64 40
@
Master Reset Code, which resets all special
modes to their power-up states, including Top
Of Form. Clears all text and control codes
from the print buffer.
ESC 65 41 A
Sets line spaCing to n/72 inch (n dots).
Format:
(ESC)" A"CHR$(n)
where 0 (
=
n (
=
85.
258