Installing The Optional Tractor Feeder - Epson FX-80 User Manual

Figure 1·8. Installing the optional tractor feeder.
To adjust the width of the tractor feeders, simply release the trac-
tor's locking levers on each side so that the units move freely (see Fig-
ure 1-9). Now adjust the units to match the size of your paper or
labels. Lock the units back into place. Pull the paper-release lever to-
ward the front of the printer. It's that easy!
To remove the tractor unit, use the pair of tractor-release levers (one
of these is shown in close-up in Figure 1-10). Press both levers forward
and rock the unit up and back toward the rear of the printer. The
entire tractor unit should come off easily-you should not have to pull
or tug on the unit to remove it.
11