printer, and then push the paper-release lever toward the rear of the
printer to engage the friction feed. Use the manual-feed knob to feed
the paper through (as you would feed paper through a typewriter).
And, finally, lower the paper bail onto the paper to hold it in place.
Parts with Settings
The FX-80 can be adjusted to meet your hardware and software
needs. Hardware adjustments that you'll want to know about first
involve the paper thickness lever and a set of internal switches; the
next two sections fill you in on adjusting these settings.
The paper thickness lever
The paper thickness lever shown in Figure 1-11 adjusts the print
head to accommodate various paper thicknesses.
Low
High setting
Normal
setting
Figure 1·11a. Setting the paper thickness lever
(side view).
13