Table of Contents
Advertisement
Items of Tray Paper Settings
This section describes the items in Tray Paper Settings menu.
Default settings are shown in bold type.
• If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed
might occur because the correct paper size was not detected.
Tray 1
Paper Size
You can specify the size of the paper in Tray 1 when printing data from the computer.
The paper size you can set for Tray 1 is as follows:
1
8
/
×11
2
The paper guide for the tray 1 is fixed. If you need to change the paper size, contact your service
representative.
Paper Type
You can set the display so you can see what type of paper is loaded in the paper tray.
The paper types you can set for Tray 1 are as follows:
[Do not Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Yellow],
[Green], [Blue], [Purple], [Ivory], [Orange], [Pink], [Red], [Gray], [Letterhead], [Preprinted Paper],
[Bond Paper], [Cardstock], [Prepunched Paper]
Paper Thickness
The paper thicknesses you can set for Tray 1 are as follows:
• Plain Paper
2
52 - 105 g/m
• Middle Thick
106 - 163 g/m
• Thick Paper 1
2
164-216 g/m
The default setting for "Paper Type" is Do not Display.
The default setting for "Paper Thickness" is Plain Paper.
The default setting for "Apply Duplex" is Yes.
The default setting for "Apply Auto Paper Select" is Yes.
(14 - 28 lb BOND)
2
(28 lb BOND - 90 lb INDEX)
(90 lb INDEX - 80 lb COVER)
Items of Tray Paper Settings
2
67
Advertisement
Table of Contents
