Connecting To The Usb Interface - Toshiba e-studio905 Operating Instructions Manual

3. Connecting the Machine
3. Connect the Ethernet interface cable to the Gigabit Ethernet port.
3
4. Connect the other end of the Ethernet interface cable to a network connection device such
as a hub.
5. Turn on the main power switch of the machine.
1. Indicator (green)
When 10BASE-T is operating, the LED is lit green. When 100BASE-TX is operating it is turned off.
2. Indicator (yellow)
When 100BASE-TX is operating, the LED is lit yellow. When 10BASE-T is operating, it is turned off.
3. Indicators (both green and yellow)
When 1000BASE-T is operating, both LED are lit.
• For details about how to turn on the main power switch, see "Turning On the Main Power", About
This Machine.
• For details about installing the printer driver, see "Preparing the Machine", Printer Reference.

Connecting to the USB Interface

This section describes how to connect the USB2.0 interface cable to the USB2.0 port.
104
CCJ003
BRV036S