5. Monitoring and Configuring the Printer
• Checks the machine's network settings and detailed device information.
• Enables you to change the machine's network settings.
• You can check details of print jobs sent from a computer.
• Allows you to check job histories of printed, scanned, and photocopied documents identified
by user codes.
• Allows selection of functions such as printing and scanning for each user code.
• E-mail addresses stored in the machine can be changed and saved by computer.
• You can make settings for and display the status changes of group devices.
• Using Address Management Tool, you can manage, user names for Scan to Folder, and
addresses for sending and receiving.
• The e-mail sender's name and folder can be protected.
5
Installing SmartDeviceMonitor for Admin
Follow the procedure below to install SmartDeviceMonitor for Admin
1.
Quit all applications currently running.
2.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3.
Select an interface language, and then click [OK].
English and French are available.
4.
Click SmartDeviceMonitor for Admin.
5.
Click [Next].
The software license agreement appears in the License Agreement dialog box.
6.
After reading through its contents, click [Next].
7.
Follow the instructions on the screen.
A message appears when the installation is completed.
8.
Click [OK].
A message about restarting the computer may appear. Restart the computer to complete installation.
• Auto Run may not work under certain operating system settings. In this case, launch "Setup.exe"
located on the CD-ROM root directory.
• If you are required to restart the computer after installing SmartDeviceMonitor for Admin, restart the
computer and continue the configuration.
152