Table of Contents
Advertisement
6. Registering Addresses and Users for Scanner Functions
7.
Press [Auth. Info], and then press [ Next].
8.
Press [Specify Other Auth. Info] on the right side of Folder Authentication.
When [Do not Specify] is selected, the FTP User Name and FTP Password that you have specified in
Default User Name/Password (Send) of File Transfer settings applies. For details, see "File Transfer".
9.
Press [Change] right "Login User Name".
10.
Enter the login user name, and then press [OK].
11.
Press [Change] right "Login Password".
6
12.
Enter the password, and then press [OK].
13.
Enter the password again to confirm, and then press [OK].
14.
Press [Folder].
15.
Press [FTP].
16.
Press [Change] right "Server Name".
17.
Enter the server name, and then press [OK].
18.
Press [Change] right "Path".
19.
Enter the path, and then press [OK].
You can enter an absolute path, using this format: "/user/ home/username"; or a relative path, using
this format: "directory/sub-directory".
If you leave the path blank, the login directory is assumed to be the current working directory.
You can also enter an IPv4 address.
278
Advertisement
Table of Contents
