Table of Contents
Advertisement
2. Tray Paper Settings
217 - 256 g/m
The default setting for "Paper Type" is Do not Display.
The default setting for "Paper Thickness" is Plain Paper.
The default setting for "Apply Duplex" is Yes.
The default setting for "Apply Auto Paper Select" is Yes.
2
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
For details about the relations between possible paper sizes and thickness, see "Recommended Paper
Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This
Machine.
The optional tab sheet holder is required when using tab stock in Tray 6.
The Tab Position Shift can be set in millimeters, when Tab Stock has been selected.
The Tab Position Shift can be set in 1 inch (1 millimeter) units, within a range of 0 to 0.6 inches (0 to
15 mm). The default is "0.5" inches (13 mm).
Designation Sheet 1 - 9
You can specify and display the paper tray to set designation sheets. You can also specify the display
time and copying method for two sided copying.
• Select Designation Sheet from 1-9
You can specify paper tray 1-9 as the source trays for designation sheets.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Apply Duplex
You can select [Yes] or [No].
Cover Sheet Tray
You can specify and display the paper tray to set front cover sheets. You can also specify the display
time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Apply Duplex
You can select [Yes] or [No].
Back Cover Sheet Tray
You can specify and display the paper tray to set back cover sheets. You can also specify the display
time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
88
2
(80 lb COVER - 140 lb INDEX)
Advertisement
Table of Contents
