Table of Contents
Advertisement
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm
The default setting is "0" mm.
1
• 8
/
11
2
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm
The default setting is "0" mm.
1
• 8
/
11
2
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm
The default setting is "0" mm.
• Other Paper Sizes
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm
The default setting is "0" mm.
0202: Adjust Punch Position With Feed Dir. / Finisher
Adjust the horizontal position of the punch holes when using the optional finisher. Press [+] to move
the position closer to the bottom (right) relative to the paper feed direction, or [-] to move it closer to
the top (left).
• 2 Holes Type JP / EU
• Max.: 7.5 mm
• Min.: -7.5 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 3 Holes Type US
• Max.: 7.5 mm
• Min.: -7.5 mm
• Step: 0.5 mm
The default setting is "0" mm.
• 4 Holes Type EU
Adjustment Settings for Operators
8
321
Advertisement
Table of Contents
