Table of Contents
Advertisement
6. Registering Addresses and Users for Scanner Functions
3.
Press [Administrator Tools].
4.
Press [Address Book Management].
5.
Check that [Program / Change] is selected.
6.
Select the name whose folder you want to change.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, folder name, and e-mail address.
7.
Press [Folder].
8.
Select the items you want to change.
9.
Press [Connection Test] to check the path is set correctly.
10.
Press [Exit].
11.
Press [OK].
12.
Press [Exit].
13.
Press the [User Tools] key.
6
• To change the name, key display and title, see "Registering Names".
• p.254 "Registering Names"
Changing the protocol
This section describes how to change the protocol.
1.
Press [SMB] or [NCP].
A confirmation message appears.
2.
Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
3.
Enter each item again.
280
Advertisement
Table of Contents
