Inspection 3 - Main Rotor And Upper Transmission Deck - MD Helicopters MD Explorer Servicing And Maintenance

INSPECTION 3−MAIN ROTOR AND UPPER TRANSMISSION DECK
Table 204. Inspection 3 − Main Rotor and Upper Transmission Deck (Area 3 and 4)
Registration No.
Model
900 Make sure you comply with applicable Special Inspections (Calendar)
for Area 3&4 and make entries in the Rotorcraft Log Book.
900 Fully clean helicopter as necessary before you start inspection.
900 Refer to related manufacturers' publications for detailed necessary
inspection of engines, starter/generators, battery and all installed STC
and optional equipment.
900 Examine the aircraft maintenance records for aircraft discrepancies
and correct as necessary.
900 Examine Integrated Instrument Display System (IIDS) Exceedance
Log Menu and Fault Log Menu. Record and correct discrepancies as
necessary. (NOTE: Logs may be viewed on the IIDS or refer to
GBMC User Guide for complete download and save of IIDS data).
900 Make sure you comply with component mandatory retirement, refer to
Airworthiness Limitation Schedule and make entries in Log Book.
900 Make sure you comply with component overhaul, refer to Overhaul
Schedule and make entries in Log Book.
900 Make sure you comply with all applicable Airworthiness Directives
and service bulletins and make entries in Log Book.
900 Make sure all placards and markings are installed.
900 Remove trim panels, covers, and access panels as necessary.
900 Examine the area fuselage exterior panels, exterior surfaces of upper
deck fairings and cowls, and structure that is in view for damage,
deterioration, and distortion.
900 Examine the main rotor blades:
D For damage and condition
D Abrasion strip for security and bond condition
D Do an inspection of the joints between the main rotor blade
abrasion strips for delamination.
MD Helicopters, Inc.
Rotorcraft Maintenance Manual
Serial No.
Requirement
General
Fuselage
Main Rotor
05-20-50
CSP−900RMM−2
Helicopter Total Hours
RMM Section
05−20−10
CSP−SPM
20−20−00
01−00−00
N/A
95−30−00
04−00−00
05−10−00
N/A
11−00−00
06−00−00
53−10−00
53−20−00
53−30−00
62−10−00
Initial
Page 215
Revision 34