License Installation Procedure Over Usb - Keysight N9030B Series Installation Note

License Installation Procedure over USB

1. Locate the Option Upgrade Entitlement Certificate (5964-5178) from the kit.
2. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the
Certificate.
3. After redeeming your Option Upgrade Entitlement Certificate you will receive an email with an
attached License File.
4. Locate a USB storage device. Perform a virus scan on this device before use.
5. Save the License File to the root directory of the USB storage device.
6. Connect the USB storage device to the signal analyzer USB port. Windows will detect the new
hardware and may display the configuration menu shown in
configured according to your preferences.
Figure 1 USB Storage Device Configuration Menu
7. The signal analyzer will automatically consume the License File (this may take a few minutes).
When the License File is consumed the Keysight License Manager will display a "Successful
License Installation" message as shown in
Figure 2 Successful License Installation
Installation Note N9030-90122
Figure
Figure 2.
Option FBP, Full Bypass Path
1. This menu may be
7