Precautions On The Use - UMS HYPROP Operation Manual

 This Section "Precautions Relating to Use" sets forth precautionary notes that the user should
observe in order to prevent physical injury to the user and/or damage to property.
 The nature of problems that may result in the event of improper operation, and consequential
effects on the quality and performance of the balance, are indicated under the two categories of
"Caution" and "Recommended," and explained using symbols.
注 意
CAUTION
！
RECOMMENDED
Meanings of Symbols
強制記号
Mandatory
Symbol:
禁止記号
Prohibitive
Symbol:
分解禁止
Do Not
Disassemble
定格外禁止
Do Not
Deviate from
Ratings
移動禁止
Do Not Move
2

1. Precautions on the Use

This symbol indicates a risk of injury or property damage if the
balance is used improperly. Be sure to observe these notes to
ensure safe use of the balance as the improper use may cause
serious results.
This term indicates steps that the user should take to ensure the
quality and reliability of the balance.
Each symbol is accompanied by an instruction.
Indicates a "mandatory" action that should be executed
without fail.
Indicates a "prohibited" action that must not be
executed.
！
注 意
CAUTION
 Do not disassemble or modify the unit.
 Could cause malfunction or heat generation
 Contact our Technical Service Division or your
local dealer.
 Only AC power (rated value) should be used.
 Only use the dedicated AC adapter.
 Use of other types of power or adapters may
result in heat generation or malfunction of the
balance.
 Do not move the balance when a sample is
loaded.
 The loaded sample may fall off the
measurement pan and cause an injury.
水平確認
Check Level
Do not Use 使用禁止