Table of Contents
Advertisement
3.1 Installation
1
Positioning the measurement pan
2
Securing the exact level of the balance
Position of air bubble
in the level
3
Connecting the AC adapter
8
3. Basic Operations
First, mount the pan base on the
main unit of the balance and place
the measurement pan on top of it.
Turn the adjusters until the bubble
rests in the center of the red circle
on the level.
<Caution>
Use caution when operating the
adjusters on the square-pan type to
prevent them from lifting up.
Connect the AC adapter to the
balance, as illustrated at left.
※Take 5 minutes before operation.
<Caution>
If the balance has the battery
installed, refer to "11. Operating the
Balance with the Battery," on page
39.
Advertisement
Table of Contents
