Operation For Tare Subtraction - UMS HYPROP Operation Manual

3.3 Operation for Tare Subtraction

1 Place the tare (container) on the balance.
2 Reset read-out indication to zero.
3 Load the sample to be weighed.
☆ Weighing only the weight of an added sample
4 Resetting the indication to zero
5 Adding samples to be measured
10
As you place the tare, the balance
indicates its weight.
Press the Zero/Tare
The tare is subtracted and the
balance indicates zero.
The balance will now indicate only
the weight of the sample loaded in
the tare.
Press the Zero/Tare
The total weight of the sample
loaded on the measurement pan is
indicated as zero.
The balance indicates only the
weight of an added sample.
When the weight (of a sample)
currently loaded on the
measurement pan is reset to zero
with the Zero/Tare
mentioned above, only the weight of
the sample will be measured.
key.
key.
key, as