Table of Contents
Advertisement
5. Switching Function for Units of Measurement
Pressing the
Function
on.
Up to five different units can be registered for use only when the function key is properly set on a
balance for which the lock switch is off.
5.1 Switching Units of Measurement
Switching the units of measurement to be displayed
5.2 Setup of Units of Measurement (Only when the lock switch is
off)
When values [81.S.u.] to [85.S.u.] are entered prior to use, the desired unit of measurement to be
displayed can be chosen simply by pressing the
of measurement that can be set here, please refer to "4.2 Description of Functions" on page 13.
Example: To change the default factory settings to pound units, use [82.S.u.] in the factory
settings.
1
Display the function item [82.S.u. 14]
2
Setting the unit to a pound
key allows the user to switch the unit of measurement to [g], [ct], [%], and so
g
%
Pcs
Press the
Each press advances through the units
of measurement to be displayed.
※The balance is shipped from the
factory with the following default
setup: [g] [ct] [Pcs] [%] [g]
· · ·
Function
key. For more information on the units
Press and hold down the
key.
Release the key as [Func
the display.
The function setup mode is now
activated and the first item is displayed.
Press the
times, until [82.S.u. 14] appears.
Press the
times to specify [82.S.u. 16].
Function
key.
Function
] appears on
Function
key several more
Zero/Tare
key several
15
Advertisement
Table of Contents
