Table of Contents
Advertisement
4.1 Setup and Checking of Functions
1
Invoking the function
Continuous pressing
2
Selecting the next item
3
Selecting an item
4
Changing the content of an item
5
Terminating the function selection
12
4. Functions
Key released
Press and hold down the
Function
key until the indicator
changes to "Func," then release
the key.
The function setup mode is
activated, and the first item,
b.G. 1 (Bar graph) ] appears.
[1.
(See "4.2 Description of Functions"
on page 13.)
Press the
Function
The indication changes to the next
0 (Limit function)].
item, [2.SEL
Pressing the
Function
advances the function items at the
rate of one item per press.
Select the item to be changed with
the
Function
key.
Each press of the
Zero/Tare
changes the digit on the right end.
Select the desired one.
Press the
Set
key.
The balance terminates the function
setup and returns to measurement
mode.
key.
key
key
Advertisement
Table of Contents
