Table of Contents
Advertisement
3.2
Operation Check
1
Turning on the power
2
Checking the display
（When lock switch is set on）
3
Switching the measurement mode
4
Verifying changes in the read-out indicator
*
When the balance has the AC
adapter connected, it displays [ ].
Pressing the
On/Off
The display section lights up, and
the balance is ready for operation.
Check to see if the display has any
missing indications or unlit parts.
A few seconds after startup, the
indication is reset to zero.
After every segment lights,
If something is loaded, the display
does not change [on 0] In this
case, remove the load.
Press the
Function
Each time the key is pressed, the
unit of measurement changes, as
indicated.
※The balance is shipped from the
factory with the following switching
sequence: [g] [ct] [Pcs]
[%] [g] · · ·
Press the measurement pan lightly
and make sure that the read-out
indicator changes.
Also, ensure that the read-out
indicator is reset to zero when you
release your hand.
key
key.
9
Advertisement
Table of Contents
