Table of Contents
Advertisement
3
Pressing the [Set] key to restore measurement mode.
4
Pressing the [Function] key to change the units of
measurement
☆ Key Points of the Procedure ☆
1.
When set values are entered in the function items [81.S.u.] to [85.S.u.] prior to use, the desired
unit of measurement to be displayed can be selected simply pressing the
more information on the units of measurement that can be set, please refer to "4.2 Description
of Functions," on page 13.
2.
The units are displayed in the same sequence as the settings made from [81.S.u.] to
[85.S.u.].
3.
If [00] is set, no unit of measurement will be displayed, even when units of measurement are set
in subsequent items.
4.
[00] cannot be set in [81.S.u.].
5.
If the same unit of measurement is set multiple times, the second time (and all subsequent times)
the unit(s) occurs, it will be ignored when the display switches.
6.
The units can be set only on a balance for which the lock switch is off. Units cannot be set on a
balance with a lock switch sealed.
7.
When units other than
selected the next time the power is turned on. ( under the lock switch in on.)
16
g
%
P cs
[g] or [ct] is selected and the power is turned off, [g] is automatically
Pressing the
Set
key will reset the
measurement mode
Press the
Function
Each press of the key changes the units
of measurement to be displayed, as
[g] [ lb ] [Pcs] [%] [g]
follows:
· · ·
Function key. For
key.
Advertisement
Table of Contents
