Table of Contents
Advertisement
9.3 GLP-compliant print
At calibration, the HYPROP BALANCE Series enables printing in a format compliant with GLP. Set
the function to the GLP print support ([0.GLP 1]) side, then connect the balance to a printer or other
equipment. When calibration is complete, the balance prints out the format illustrated below.
Since only items are printed, the data should be entered manually by the person who conducted
calibration.
※Reference: "4.2 Description of Functions" (Page 13)
"9.2 Calibration of HYPROP BALANCE Series" (Page 29)
GLP-Compliant Print Form
**CALI BRATI ON**
**CALI BRATI ON**
M ODEL:
MO DEL:
S/N:
S/N:
I D:
I D:
DATE:
DATA:
TI M E:
TI ME:
*CAL. END
*CAL. END
NAM E:
NAME:
***************
***************
※To operate with CSP-160 printer, set On in DIP switch 3 (Printing controlled by scale), and OFF in
DIP switch 7(disable Manual printing).
※For more information on the printer, refer to the printer's operation manual.
Caution:
Printing is done only when calibration ends normally. The balance will not print if calibration ends
abnormally with [3-Err], [4-Err], or [StOP] being issued.
←見出し
Title
←はかり の型名
Model of balance
←はかり の製造番号
Serial No. of balance
←I D番号
ID No.
←校正し た 日付
Date of calibration
←校正し た 時刻
Time of calibration
←校正終了
End of calibration
←担当者署名
Signature of person in charge
31
Advertisement
Table of Contents
