Setup Of Limit Values By Actual Quantity Loads - UMS HYPROP Operation Manual

8.2 Setup of Limit Values by Actual Quantity Loads

1 Starting the limit function
Continuous pressing
2 Loading the sample for the lower-limit value
3 Saving the lower-limit value
4 The upper-limit value
setup
5 Loading the sample of the upper-limit value
6 Saving the upper-limit value
24
Key released
Press and hold down the
Release the key when [L.
displayed.
The currently set lower-limit value
flashes.
Load the sample of the lower-limit value
on the measurement pan.
Press the Memory
After the lower-limit value has been
saved, the balance displays it briefly
and proceeds to the following setup.
※If One-point setup was chosen, the
setup is complete.
The display now changes to
SEt ], indicating that the upper-limit
[H.
value can be set.
The currently set upper-limit value
flashes.
Load the sample of the upper-limit value
on the measurement pan.
Press the Memory
After saving the upper-limit value, the
balance displays it briefly and
terminates the setup.
Set key.
SEt ] is
key.
key.