Guest VLAN
In the Security menu, open the 802.1X folder and click Configure 802.1X Guest VLAN, which will display the following
window for the user to configure. Remember, to set a Guest 802.1X VLAN, the user must first configure a normal VLAN which
can be enabled here for Guest VLAN status.
The following fields may be modified to enable the guest 802.1X VLAN:
Parameter
Description
VLAN Name
Enter the pre-configured VLAN name to create as a Guest 802.1X VLAN.
Operation
The user has three choices in configuring the Guest 802.1X VLAN, which are:
Enable Ports – Selecting this option will enable ports listed in the Port List below, as part of the
Guest VLAN. Be sure that these ports are configured for this VLAN or users will be prompted
with an error message.
Disable Ports - Selecting this option will disable ports listed in the Port List below, as part of the
Guest VLAN. Be sure that these ports are configured for this VLAN or users will be prompted
with an error message.
Delete – Selecting this option will delete the VLAN entered in the VLAN Name window above.
Port List
Set the port list of ports to be enabled for the Guest 802.1X VLAN using the pull down menus.
Click Apply to implement the guest 802.1X VLAN settings entered. Only one VLAN may be assigned as the 802.1X Guest
VLAN.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 11- 13. Guest VLAN Configuration window
210