D-Link xStack DGS-3600 User Manual page 241

To define an Enable Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 11- 35. Enable Method List - Edit window
Figure 11- 36. Enable Method List - Add window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be authenticated
•
using the local enable password database on the Switch. The user in the next
section entitled Local Enable Password must set the local enable password.
none - Adding this parameter will require an authentication to access the Switch.
•
radius - Adding this parameter will require the user to be authenticated using the
•
RADIUS protocol from a remote RADIUS server.
tacacs - Adding this parameter will require the user to be authenticated using
•
the TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated using
•
the XTACACS protocol from a remote XTACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated using
•
the TACACS protocol from a remote TACACS server.
server_group - Adding a previously configured server group will require the user
•
to be authenticated using a user-defined server group previously configured on
the Switch.
225