Switch To Hub Or Switch - D-Link xStack DGS-3600 User Manual

Switch to Hub or Switch

These connections can be accomplished in a number of ways using a normal cable.
A 10BASE-T hub or switch can be connected to the Switch via a twisted-pair Category 3, 4 or 5 UTP/STP cable.
•
A 100BASE-TX hub or switch can be connected to the Switch via a twisted-pair Category 5 UTP/STP cable.
•
A 1000BASE-T switch can be connected to the Switch via a twisted pair Category 5e UTP/STP cable.
•
A switch supporting a fiber-optic uplink can be connected to the Switch's SFP ports via fiber-optic cabling.
•
Figure 3- 2. Switch connected to a normal (non-Uplink) port on a hub or switch using a straight or crossover
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
NOTICE: When the SFP transceiver acquires a link, the associated integrated
10/100/1000BASE-T port is disabled.
cable
14