D-Link xStack DGS-3600 User Manual page 261

Figure 12- 10. Tx Packets Analysis window (table for Bytes and Packets)
The following fields may be set or viewed:
Parameter
Time Interval
Record Number
Bytes
Packets
Show/Hide
Clear
View Table
View Line Chart
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Counts the number of bytes successfully sent on the port.
Counts the number of packets successfully sent on the port.
Check whether or not to display Bytes and Packets.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Clicking this button instructs the Switch to display a line graph rather than a table.
245