Mld Snooping Group - D-Link xStack DGS-3600 User Manual

Layer 3 gigabit ethernet managed switch
Hide thumbs Also See for xStack DGS-3600:
Table of Contents

Advertisement

MLD Snooping Group

The following window allows the user to view MLD Snooping Groups present on the Switch. MLD Snooping is an IPv6 function
comparable to IGMP Snooping for IPv4. The user may browse this table by VLAN Name present in the switch by entering that
VLAN Name in the empty field shown below, and clicking the Search button. The number of MLD reports that were snooped is
displayed in the Reports field.
To view the IGMP Snooping Group Table, click IGMP Snooping Group on the Monitoring menu:
The following field can be viewed:
Parameter
Description
VLAN Name
The VLAN ID of the MLD multicast group.
Multicast Group
The IP address of the MLD multicast group.
MAC Address
The MAC address of the MLD multicast group.
Reports
The total number of reports received for this group.
NOTE: To configure MLD snooping for the xStack DGS-3600 Series switch, go to the
Administration folder and select MLD Snooping. Configuration and other information
concerning IGMP snooping may be found in Section 6 of this manual under MLD
Snooping.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 12- 29. MLD Snooping Group Table
264

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3627gXstack dgs-3627Xstack dgs-3650

Table of Contents