D-Link xStack DGS-3600 User Manual page 200

To view the settings of a previously, correctly configured rule, click
below. Clicking the hyperlink for the Profile ID on the Access Profile Table will also bring up the Access Rule Display window.
Configure the following Access Rule Configuration settings for IP:
Parameter
Profile ID
Mode
Access ID
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 10- 9. Access Rule Display window (Ethernet)
Figure 10- 10. Access Rule Configuration window (IP)
Description
This is the identifier number for this profile set.
Select Permit to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select Deny to specify that packets that do not match the access profile are not forwarded by
the Switch and will be filtered.
Type in a unique identifier number for this access. This value can be set from 1 - 128.
Auto Assign – Checking this field will instruct the Switch to automatically assign an
•
Access ID for the rule being created.
in the Access Rule Table to view the window shown
184