D-Link xStack DGS-3600 User Manual page 195

Parameter
Profile ID (1-14)
Type
VLAN
Source MAC
Destination MAC
802.1p
Ethernet type
The page shown below is the IP Access Profile Configuration page.
The following parameters can be set, for IP:
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Description
Type in a unique identifier number for this profile set. This value can be set from 1 – 14.
Select profile based on Ethernet (MAC Address), IP address, or IPv6 address. This will
change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
•
header.
Select IP to instruct the Switch to examine the IP address in each frame's
•
header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's
•
header.
Selecting this option instructs the Switch to examine the VLAN identifier of each packet
header and use this as the full or partial criterion for forwarding.
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
Selecting this option instructs the Switch to examine the 802.1p priority value of each packet
header and use this as the, or part of the criterion for forwarding.
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
Figure 10- 3. Access Profile Configuration (IP)
179