Mld Snooping Static Group Settings - D-Link DAS-3626 User Manual

Enter the new rate limit and click Apply.

MLD Snooping Static Group Settings

This window is used to configure the MLD Snooping static group information on the Swtich:
To view this window, click Switch Configuration > MLD Snooping > MLD Snooping Static Group Settings, as
shown below
The following parameters may be viewed or modified:
Parameter
VLAN Name
VLAN List
IPv6 Address
Click Create to create a new entry. To search for an entry enter the information and click Find. To view all previously
configured entries click View All.
DAS-3626 VDSL2 Switch User Manual
Figure 80. MLD Snooping Rate Limit Settings – Edit menu
Figure 81. MLD Snooping Static Group Settings menu
Description
Specifies the name of the VLAN for which to configure the MLD snooping static group
information.
Specifies the list of the VLAN IDs for which to configure the MLD snooping static group
information.
Specifies the static group IPv6 address for which to configure the MLD snooping static
group information.
70