Preliminary Work; Heater Installation Location - Webasto thermo top evo Installation Documentation

Citroen Berlingo

Preliminary Work

Vehicle
• Open the fuel tank cap.
• Ventilate the fuel tank.
• Close the fuel tank cap again.
• Depressurise the cooling system.
• Disconnect and completely remove the battery with carrier.
- Completely remove the battery together with the carrier.
- Remove the air filter together with the intake hose.
- Remove the bracket of the air filter (original vehicle bolts will be reused).
- Remove the instrument panel at the centre of the storage compartment.
- Remove the lower and left instrument panel trim on the driver's side.
- Remove the knee air bag.
• Remove the underride protection.
Heater
• Remove years that do not apply from the type and duplicate label.
• Attach the duplicate label (type label) in the appropriate place in the engine compartment.
Ident. No.: 1318865A_EN
1
Status: 31.10.2012

Heater Installation Location

1 Heater
1
Installation
location
© Webasto Thermo & Comfort SE 5