Preliminary Work; Heater Installation Location - Webasto Thermo Top Evo Installation Documentation

Toyota LC 200

Preliminary Work

Vehicle
• Open the fuel tank cap.
• Ventilate the fuel tank.
• Close the fuel tank cap again.
• Depressurise the cooling system.
• Remove the right front wheel.
• Remove the wheel well trim on the right.
• Disconnect the battery on the right and remove it completely, including the carrier.
• Remove the air filter together with the intake hose.
• Remove the lower engine cover.
• Remove the glove compartment.
• Remove the airbag of the front passenger's side footwell.
• Remove instrument panel trim of front passenger's side footwell.
• Remove the door sill trim on the front passenger's side.
Heater
• Remove years that do not apply from the type and duplicate label.
• Attach the duplicate label (type label) in the appropriate place in the engine compartment.
Ident. No.: 1318445A_EN
1
1
Status: 18.09.2012

Heater Installation Location

1 Heater
Installation
location
© Webasto Thermo & Comfort SE 5