Preliminary Work; Heater Unit Installation Location - Webasto Thermo Top E Installation Instructions Manual

part number: 93199670

Preliminary Work

WARNING!
- Disconnect the battery "earth" or "ground" connection.
- Depressurize the cooling system.
- Copy the factory number from the original type label to the duplicate type label.
- Remove years that do not apply from the duplicate label.
- Attach the duplicate label (type label) in the appropriate place.
- Completely remove the battery
- Remove the fuse and relay box
- Remove the engine cover
- Remove the engine control unit
- Disconnect the power-steering fluid reservoir
- Disconnect the expansion tank
- Remove the charge-air tube between the air filter and the turbocharger
- Disconnect the air hose from the charge-air tube to the engine at the engine
- Remove the filler neck of the window washer system
- Remove the vent line at the top to the coolant expansion tank
- Open the fuel tank cap, ventilate the tank.
- Close the tank cap again.
- Remove the underride protection
- Open the left tank mounting service lid
- Remove the A/C control panel according to the manufacturer's instructions (only with manual air-
conditioning)
- Remove the glove compartment (only with automatic air-conditioning)
Remove page 29 "Operating Instructions for End Customer" and add to the vehicle operating
instructions.
1
1
Opel Antara

Heater unit installation location

1 Heater unit
Installation
location
5