Preliminary Work; Heater Installation Location - Webasto Thermo Top E Installation Documentation

Preliminary Work

WARNING!
- Open the fuel tank cap and vent the fuel tank.
- Close the fuel tank cap again.
- Disconnect the battery.
- Depressurise the cooling system.
- Copy the factory number from the original type label to the duplicate type label.
- Remove years that do not apply from the duplicate label.
- Attach the duplicate label (type label) in the appropriate place.
- Remove the engine cover.
- Detach and remove the right and left-hand wheel well trim.
- Remove the left front wheel.
- Remove the bumper.
- Remove the washer reservoir.
- Remove the underride protection.
- Remove the glove compartment.
- Remove the A-pillar trim in the driver's side footwell.
- Remove the lower instrument panel trim on the driver's side.
- Detach the fuse and relay carrier in the passenger compartment.
Remove page 30 "Operating Instructions for End Customer" and add to the vehicle operating instruc-
tions.
1313385D_EN
Renault Laguna / - Grandtour / - GT / - Coupe

Heater installation location

1 Heater
1
1
Installa-
tion loca-
tion
5