Final Work - Webasto thermo top evo Installation Documentation

Citroen Berlingo

Final Work

WARNING!
Mount removed parts in reverse order. Check all hoses, clamps and all electrical connections for firm
seating. Insulate all loose wires and tie back.
Only use manufacturer-approved coolant. Spray the heater components with anti-corrosion wax
(Tectyl 100K, Order No. 111329).
• Connect the battery.
• Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
• Adjust digital timer, teach Telestart transmitter.
• Make settings on A/C control panel according to the "Operating Instructions for the End
Customer".
• Place the "Switch off parking heater before refuelling" signboard in the area of the filler
neck.
• For initial startup and function check, please see installation instructions.
70
2
1
Ident. No.: 1318865A_EN
1
40
66
67
2
Status: 31.10.2012
1 Underride protection
2 Discard section
When installing underride protection 1, ensure
sufficient distance from silencer, adjust if nec-
essary. Align exhaust end section 2 centrally in
the recess of underride protection 1.
Cutting out
underride
protection
Aligning
end section
Webasto Thermo & Comfort SE
Postfach 1410
82199 Gilching
Germany
Internet: www.webasto.com
Technical Extranet:
http://dealers.webasto.com
© Webasto Thermo & Comfort SE 31