Fuel - Webasto thermo top evo Installation Documentation

Citroen Berlingo

Fuel

CAUTION!
Open the vehicle's fuel tank cap, ventilate the tank and then re-close the tank lock.
Catch any fuel running off in an appropriate container.
Install fuel line and metering pump wiring harness so that they are protected against stone impact. Un-
less specified otherwise, always fasten using cable ties.
Mount the fuel line and wiring harness with rub protection on sharp edges.
WARNING!
The fuel line and wiring harness are routed to the metering pump as shown in the wiring harness rout-
ing diagram.
1 1
2
4
3
2
Ident. No.: 1318865A_EN
42
43
1
44
1
Status: 31.10.2012
Route fuel line and wiring harness of metering
pump in 2100 mm corrugated tube 1 to the
firewall.
Route fuel line and wiring harness of meter-
ing pump in original vehicle line duct to the
underbody.
1 Original vehicle pass through
2 Fuel line, wiring harness of metering
pump in corrugated tube
8mm dia. hole at position 3 in original vehicle
sealing 2 .
1 Original vehicle line duct
4 Fuel line, metering pump wiring harness
Installing
lines
Installing
lines
Installing
lines
© Webasto Thermo & Comfort SE 22