ENGINE (CYLINDERS / HEAD / BASE / EXHAUST) 7 - 34
Crankshaft Deflection on PTO side
Crankshaft Deflection on MAG side
Crankshaft Deflection in Center of Crankshaft
NOTICE:
Crankshaft deflection cannot be correctly measured between
centers of a lathe.
If the deflection exceeds the specified tolerance, crankshaft
should be repaired or replaced.
Connection Rod Big End Axial Play
Using a feeler gauge, measure distance between thrust washer
and crankshaft counterweight. If the distance exceeds specified
tolerance, repair or replace the crankshaft.