ENGINE (CYLINDERS / HEAD / BASE / EXHAUST) 7 - 20
With the syringe, fill the outer ball bearing and inner side of outer
seal with 40 to 45 mL of Isoflex grease as shown at right.
Apply 6 mL of grease to MAG side outer bearing.
NOTICE:
If replaced with new bearing, do not apply grease as new
bearings come with grease already applied.
At crankshaft installation, position drive pins as illustrated.
1. Position pins
For 50 mL (2 U.S. oz) of injection oil in the pan under central gear
to lubricate pump gearing as per photo.
1. Oil bath
BALLS COATED WITH A SEAM OF GREASE
FILL WITH GREASE AND SET IN PLACE
1