Changing The Seam Appearance; Bobbin Winding - Dürkopp Adler 512 Assembly Instructions Manual

Programming
Operating Instructions 512/532 - 04.0 - 08/2016
5.8

Changing the seam appearance

1. Press the Select button until the Pattern Number symbol
LED illuminates.
2. Press the +/– Function buttons until the desired seam appe-
arance number is shown in the Function display.
3. Press the Ready button.
5.9

Bobbin winding

Prerequisite:
• Needle removed.
• Needle thread not threaded.
1. Press the Ready button.
 The button LED illuminates.
2. Press the Ready button.
 The button LED goes out.
3. Press the Select button until the Bobbin symbol LED illumi-
nates.
4. Press the Ready button.
 The button LED illuminates, the clamp lowers.
5. Press the pedal forwards.
 The bobbin winding process starts.
6. Press the pedal fully forwards to stop the bobbin winding pro-
cess.
7. Press the Ready button.
 The button LED goes out, the clamp raises.
41