8
1.5
Liability
All information in these instructions were compiled with conside-
ration to the state of the art, and applicable standards and regu-
lations.
The manufacturer cannot be held liable for damages resulting
from:
• Breakage and transport damages
• Failure to observe operating instructions
• Improper use
• Unauthorized modifications to the machine
• Use of untrained personnel
• Use of unapproved replacement parts
1.5.1
Transport
Dürkopp Adler cannot be held liable for breakage and transport
damages. Inspect the delivery immediately upon receiving it. Re-
port any damage to the last transport manager. This applies even
if the packaging is undamaged.
Leave machines, equipment and packaging material in the con-
dition in which they were found when the damage was discovered.
This will ensure any claims against the transport company.
Report all other complains to Dürkopp Adler immediately after
receiving the product.
1.5.2
Proper use
The Dürkopp Adler 512/532 is intended for sewing light to mode-
rately heavy material.
The machine is only intended for use with dry material. The
material cannot contain any hard objects.
The seam is produced using core spun threads, polyester fibers,
or cotton threads.
Class 512 thread strength of dimensions 50/3 - 130/3
Class 532 thread strength of dimensions 50/3 - 150/3
The sewing machine is intended for industrial use.
Operating Instructions 512/532 - 04.0 - 08/2016
About these instructions